01-23-2025, 06:20 AM
Here's the step by step:
1. Open a layout plan
[attachment=34]
2. Follow the sequence, to click Annotate -> Dimension -> Linear
3. Click the small arrow (Bottom right corner) for dimension style.
[attachment=35]
4. Choose "ISO-25", click "New" in Dimension style manager
[attachment=36]
5. Input the new style name, and click continue
[attachment=37]
6. Important here, input the text size first (the typical text size in your drawing), in order to avoid some confused in coming setting and preview.
[attachment=38][attachment=39]
7. Set “Precision” to 0 in the Primary Units
[attachment=42][attachment=41]
8. For the “Extend beyond dim lines”, input 70 (roughly 50% of text height); and “Offset from origin”, input 70 (roughly 50% of text height)
[attachment=43][attachment=44]
9. Set Arrowheads symbol and arrow size 100 (nearly the text size)
And then finally click okay.
[attachment=45][attachment=46]
10. Click close.
[attachment=47]
11. Make Dimension in drawing
a)Select the style “New ISO-25”
b)Select “linear” to draw a dimension 4300
[attachment=48]
c)After the first dimension 2420 completed, then to click “Continue”, draw a dimension continued from the previous dimension:
[attachment=49]
Done
1. Open a layout plan
[attachment=34]
2. Follow the sequence, to click Annotate -> Dimension -> Linear
3. Click the small arrow (Bottom right corner) for dimension style.
[attachment=35]
4. Choose "ISO-25", click "New" in Dimension style manager
[attachment=36]
5. Input the new style name, and click continue
[attachment=37]
6. Important here, input the text size first (the typical text size in your drawing), in order to avoid some confused in coming setting and preview.
[attachment=38][attachment=39]
7. Set “Precision” to 0 in the Primary Units
[attachment=42][attachment=41]
8. For the “Extend beyond dim lines”, input 70 (roughly 50% of text height); and “Offset from origin”, input 70 (roughly 50% of text height)
[attachment=43][attachment=44]
9. Set Arrowheads symbol and arrow size 100 (nearly the text size)
And then finally click okay.
[attachment=45][attachment=46]
10. Click close.
[attachment=47]
11. Make Dimension in drawing
a)Select the style “New ISO-25”
b)Select “linear” to draw a dimension 4300
[attachment=48]
c)After the first dimension 2420 completed, then to click “Continue”, draw a dimension continued from the previous dimension:
[attachment=49]
Done